Same as the standard "Clean/Dirty Effects Switcher" but with an added Tuner Out for silent tuning, Master Bypass switch for bypassing all loops at once, and one switch to combine both loops in series at any time!
Some people have problems using multiple effects through one amp because they use certain ones for thier clean tones and certain ones for thier dirty tones. When they switch to dirty, they have to stomp the clean effects "off" and the dirty effects "on". That's a lot of fancy footwork that not necessary.
EXAMPLES: Put a Chorus, and Compressor in one loop then, put an Overdrive, Flanger, and Phaser in the other loop. Turn them ALL on and listen as you switch from a clean, compressed, chorused guitar to an overdriven, phased, flanged guitar signal with the click of one switch into one amp!! And if you want to nuke everyone, just select the "loop 1+2" switch and watch everyone melt as you are now using the effects in both loops! And if you have an effect that you use for both clean and dirty, (like a Delay or Wah) just run it before or after the Clean/Dirty Switcher and it'll be on no matter which loop you have activated. Click the "Master Bypass" and go straight into your amp at any time also. This gives you the ABility to bypass all effects at once.
Plus, plug your favorite tuner into the "Tuner Out" jack and when you want to tune, just click the "Tune" switch and you will be ABle to tune silently! ("Tune" mode mutes the amp)
LEDS: For the 9V DC Jack, these units require a 9V AC adapter with a Boss/Ibanez style 2.1mm barrel plug. If you do not have one, we have these in the "Accessories" section. (Unit will work without LED's. The LED circuit in any loop-Master unit does not affect tone.)
DIMENSIONS: 10.0" X 2.2" X 1.6"